4B Vise Splice
Elevator Belt Splice & Fastener

4B Vise Splices are mechanical splices and fasteners for use on most PVC and rubber elevator belts.

Each splice unit is made of three pieces. The outside plates have two different gripping areas. The ribbed gripping area is mounted towards the face of the belt. The opposite end has a series of both longitudinal and axial "teeth." The center plate is symmetrical and cannot be improperly installed around its elongated center hole.

The splice works by using the tension supplied by the belting. This tension on the belt ends pulls the outer plates apart, and forces gripping pressure towards the teeth on the splice unit. The greater the belt tension, the more pressure is exerted on the gripping teeth at the forward end of the splice.

4B Vise Splice
Product Features
  • For Belts 1000 to 1400 kN/m Tensile Strength
  • Available in Ferrous & Non-Ferrous Metal
  • Non-Sparking (Non-Ferrous Version)
  • Simple 3-Piece Construction
  • Max. Temperatures: Ferrous 315°C, Non-Ferrous 260°C
  • Each Splice Accommodates 5cm of Belt Width
    Literature Downloads
    Technical Manuals & Docs

    Elevator Bolt Hardware

    Nuts, Spacers, Washers
    Elevator Bolt Hardware

    Along with the various types and sizes of elevator bolts, 4B offers all of the hardware required for each fastener.         
    For more information on all elevator bolt hardware specifications, see our full bolt catalogue by clicking the link below.


    Can I use the 4B Vise Splice on a manlift or wing pulley?  
      Never use the 4B Vise Spice on a manlift or wing pulley.  
    Can I re-use my hardware?  
      Always use new bolts, washers & nuts.