Hoppa till huvudinnehåll
Detects level or plug situations for bulk granular solids or liquids in tanks, bins, or silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs.
- Capacitance probe; detects the presence or absence of liquids and free flowing bulk granular materials and powders such as grain, feeds, seeds and chemicals
- Application: level indicators (tanks / silos); choke switches (chutes, conveyors, elevator legs)
- Detects presence or absence of liquids & free-flowing bulk granular materials
- Easy installation & self-containing
Belt Conveyor
Bucket Elevator
Chain Conveyor
Screw Conveyor
Silos & Storage
Specifications
| | ||
| Specification | Value | |
| Supply Voltage: | 24 to 240 VAC/VDC | |
| Supply Fusing: | Supply to be fused at 500mA maximum | |
| Switching Capacity: | BSE12V10AI: 100 mA maximum; BSE15V10AI: 60VDC/VAC, 3A | |
| Saturation Voltage: | BSE12V10AI: 5.2 Volts maximum (output on); BSE15V10AI: N/A | |
| Leakage Current: | BSE12V10AI: <1.0 mA maximum (output off); BSE15V10AI: N/A | |
| Ambient Temperature: | 5°F (-15°C) to +122°F (+50°C) | |
| Output State: | M3003V10AI: FET; M3007V10AI: SPCO relay | |
| Sensing Range: | 1” (25 mm) maximum | |
| Enclosure: | Nylon - ISO threaded 30 mm by 1.5 mm pitch | |
| Relative Humidity: | 90% RH | |
| LED Indicators: | Blue - normally energised | |
| Connections: | 2 wire (BSE12V10AI) or 5 wire (BSE15V10AI), 3m long cable. | |
| Protection: | IP66 |
Downloads
Accessories
BAS4
The BAS4 is a binswitch abrasion shield, heavy duty cover.
The steel, zinc plated cover will give additional protection to both the BAS3 and BSE12V10AI/BSE15V10AI..
BAS3 not included.
Mounting Plates (Top & Side)
Mild steel powder coated mounting flange with 11/4-inch NPT or 1 inch BSP, half or full coupling. Ensures a solid fixing to tanks silos and bins. Suitable for Binswitches, Rotosafes, Autoset .
Supplied complete with weather gasket. (Also available in stainless steel).
Kit CAPA - Adjustable Depth Level Kit
The adjustable depth level kits are an ideal solution for the quick installation of capacitive level indicators in variable heights. On demand, they can be delivered with the sensor pre-installed and configured.
FAQ's
What is the range of the Binswitch?
Typical sensing range is 1 inch (25 mm).