STEEL WEB Belt
Steel web elevator belt

4B's STEEL WEB belt is a rubber elevator belt with a special steel cord core. The cords provide low elongation with high elasticity in the length, and cross rigidity in the width. The built-in elasticity allows running over slightly crowned pulleys which greatly improves belt tracking. The rigid weft cords act as a barrier to ripping and tearing which increases the holding ability for the bucket bolts. This produces a good cross rigid belt resulting in excellent straight tracking characteristics. In contrast, most conventional steel cable belts lack elasticity and consequently have to run over truly flat, cylindrical pulleys which increases the risk of belts off tracking.

steel web elevator belt
Product Features
  • Tall high capacity elevators, hot industrial materials 
  • Minimum stretch
  • 3+3 or 4+4 covers
  • Temperature resistant up to 130C continuous
Belt Properties
Anti-Static
Flame Resistant
Temperature
up to 130˚C continuous
    Belt type Strength Covers Belt Thickness Minimum Pulley Dia. Approximate Weight
    SWB (N/mm) (mm) (mm) (mm) (kg/sqm)
    SW 800 800 3+3 12.0 500 18.0
    SW 1000 1,000 3+3 12.0 500 18.7
    SW 1250 1,250 4+4 13.0 630 21.0
    SW 1400 1,400 4+4 15.0 630 24.5
    SW 1600 1,600 4+4 15.0 630 25.0
    SW 1800 1,800 4+4 15.0 630 25.5
    SW 2000 2,000 4+4 15.0 800 26.0
    SW 2500* 2,500 5+5 18.0 800 32.5

    *on special order

    Other types on demand:
    Type 1 - highly abrasion resistant with a maximum service temperature of 100°C
    Type 2 - abrasion resistant with a maximum service temperature of 130°C. Continuous short peaks at 150°C
    Type 3 - oil and fat resistant, anti static and flame retardant ISO 340

    Literature Downloads
    White Papers
    Case Study: How SJ buckets & steel web belts increase the capacity of cement elevators

    4B Braime Belt Clamp

    BC elevator belt fastener
    4B Braime Belt Clamp

    The Braime Clamp (BC) series of heavy duty belt splices securely fastens belting on larger bucket elevators.

    Designed from three pieces of extruded aluminium including a centre wedge section to minimize belt wear.

    PRODUCT DETAILS

    Starco™ Jumbo Bucket

    Starco Jumbo (SJ) elevator bucket
    Starco™ Jumbo Bucket

    Deep drawn solid steel elevator bucket, designed to replace large fabricated elevator buckets. For use with both standard rubber and steel web belting along with plain holes, on a chain and bucket elevator.

    PRODUCT DETAILS

    Do I have to use the Braime Clamp (BC) splice with 4B steel web belting?  
      Yes, the Braime Clamp (BC2, BC3 and BC4) was specifically designed for steel web belting.  

    Can the BC1 version of the Braime Clamp be used with 4B steel web belting?  
      No, the BC1 is for textile belts only.  The BC2, BC3 and BC4 versions incorporate an additional three piece vise grip section designed to secure the steel cords.  
         
    Is there a specific type of elevator bolt to use with 4B steel web belting?  
      4B recommends Euro DIN 15237 elevator bolts with hex keyed ends.   The hex keyed ends make installation much easier when trying to get the bolt through the steel web core.  Using a hex or allen wrench allows you to "screw" the bolt through the steel webbing.

    Bucket Elevator Design Service

    Bucket Elevator Design Service

    At 4B, we have designed hundreds of bucket elevators for all industries, including Animal Feed, Grain Handling, Flour Milling, Malting & Brewing through to Cement, Coal and other heavy industries.

    Take advantage of 4B's free, guaranteed worldwide technical support service from a team of engineers specialising in the design and calculation of bucket elevators.. Using your key technical data, our engineers can give you a detailed technical recommendation for the ideal bucket elevator with the ideal capacity and discharge characteristics. We can either design your new bucket elevator or we can help you to increase the capacity of your existing bucket elevator.

    To get a free bucket elevator calculation

    Please fill this form in as accurately as possible to allow us to deal with your enquiry more effectively. 

    At 4B, we have designed hundreds of bucket elevators for all industries, including Animal Feed, Grain Handling, Flour Milling, Malting & Brewing through to Cement, Coal and other heavy industries.

    Take advantage of 4B's free, guaranteed worldwide technical support service from a team of engineers specialising in the design and calculation of bucket elevators.. Using your key technical data, our engineers can give you a detailed technical recommendation for the ideal bucket elevator with the ideal capacity and discharge characteristics. We can either design your new bucket elevator or we can help you to increase the capacity of your existing bucket elevator.

    To get a free bucket elevator calculation

    Please fill this form in as accurately as possible to allow us to deal with your enquiry more effectively. 

    Contact Details

    Elevator Details

    If you would like to send us a technical drawing or document with your enquiry, please send to 4b-uk@go4b.com.

    CAPTCHA
    Den här frågan testar om du är en mänsklig besökare och förhindrar automatiska spaminsändningar.