Atlas AA Nylon Elevator Bucket
Heavy Duty Industrial Bucket
AA43TN, AA54TN, AA64TN, AA74TN, AA75TN, AA85TN, AA96TN, AA106TN, AA116TN, AA126TN, AA127TN/S, AA127TN, AA147TN, AA148TN, AA168TN, AA188TN, AA1810TN

Heavy-duty toughened injection moulded nylon elevator bucket.

Atlas AA elevator bucket
Product Features
  • Solid construction: manufactured from Dupont 'Zytel' super tough nylon or HDP
  • Injection moulded for uniformity
  • Corrosion and abrasion resistant
  • Non-stick property
  • Available in food grade HDP or nylon to meet USDA/FDA standards
Material
Use by Industry
Atlas AA elevator bucket - drawing
Atlas AA bucket Nominal size A B C D T X Weight Capacity (L) Capacity (L)
(mm) (mm) (mm) (mm) (mm) (mm) (Deg) (kg) Z2 (total) Z3 (water)
AA43TN 110 x 80 103 78 78 51 5.2 37 0.09 0.27 0.21
AA54TN 130 x 100 134 105 105 74 5.2 37 0.23 0.74 0.57
AA64TN 150 x 100 160 105 105 74 5.2 37 0.27 0.89 0.68
AA74TN 180 x 100 184 105 105 74 5.7 37 0.3 1.07 0.84
AA75TN 180 x 130 180 130 134 93 8.3 37 0.44 1.55 1.26
AA85TN 200 x 130 206 130 134 93 8.3 37 0.5 1.83 1.47
AA95TN 230 x 130 232 130 134 93 8.1 37 0.54 2 1.66
AA96TN 230 x 150 238 156 156 108 7.4 37 0.67 2.8 2.17
AA106TN 250 x 150 264 156 156 108 8.2 37 0.73 3.14 2.43
AA116TN 280 x 150 290 156 156 108 7.2 37 0.77 3.43 2.68
AA126TN 300 x 150 320 165 160 108 8.8 38 0.95 4.1 3.08
AA127TN/S 300 x 180 305 178 178 98 7 37 0.92 4.1 2.95
AA127TN 300 x 180 314 180 180 125 7.2 37 1.13 5.25 4
AA147TN 350 x 180 365 180 180 125 7.6 37 1.25 6.3 4.89
AA148TN 350 x 200 365 206 206 142 11.6 37 1.94 7.6 5.76
AA168TN 400 x 200 416 206 206 142 11.6 37 2.1 8.85 6.66
AA188TN 450 x 200 460 206 206 142 11.6 37 2.38 10.15 7.66
AA1810TN 450 x 250 460 258 258 168 11.8 37 3.6 14.8 11

Mounting holes an venting to customer specification.

FAQ - Elevator Buckets

FAQ - Elevator Buckets

What is a HIGH EFFICIENCY elevator bucket?  
HIGH EFFICIENCY elevator buckets incorporate all five of the following characteristics: a smooth interior front face with no "breaks", wing-less side walls, close vertical placement on the elevator belt, a tapered bottom and the ability to nest for shipping and storage.  For more details, CLICK HERE  
     
Why use Low Profile elevator buckets?  
Low profile elevator buckets are created to achieve the closest vertical spacing possible on the elevator belt, thereby optimizing the system for the greatest potential capacity.  Some styles of elevator bucket require modification and others are low profile by standard design.  Wet or sluggish inputs do not generally load and discharge well in low profile buckets.  Due to the extra capacity that is generated and the weight of the additional buckets and material, belt PIW rating, pulley shaft diameters and motor HP may have to be upgraded.  Check with 4B engineering department about the best way to get the most capacity out of your elevator leg.  
     
Why add vent holes to the bottom of an elevator bucket?  
When elevating fluffy or powdery materials, vent holes in the bottom of the elevator bucket allow it to fill and discharge more efficiently.  As material enters the bucket, it encounters a pillow of air resting in the bottom.  Vent holes provide an escape path for this pillow of air, so that the entering material does not bounce out of the bucket and back down the elevator leg casing.  Upon discharge, the vent holes allow air to re-enter the bucket at the material exits, releasing any vacuum that might hold it the bucket too long, creating down legging.  
     
Are CC style elevator buckets interchangeable with Starco elevator buckets?  
Starco elevator buckets have a special shallow geometry and are intended to be placed extremely close together on the elevator belt.  Therefore, you should check with the 4B engineering department before replacing Starco elevator buckets with any other brand or design.  
     
How long of an elevator bolt do I need?  
When installing buckets on an elevator belt, use this simple formula: 
(belt thickness + bucket back thickness + washer thickness + nut thickness + 1/4 inch)  
     
 

What is a "digger" bucket?  
Some materials can form a hardened crust along the side wall of the elevator boot, and powders sitting over time can become rock hard.  Both of these issues can cause premature elevator bucket wear.  Digger buckets are designed to have slightly more width and projection than standard buckets, thereby "digging" through or breaking apart the hardened material, helping to prevent added wear to the standard buckets.  Digger buckets are traditionally made from steel, however nylon buckets may also be used depending on the application.  
     
How many digger buckets do I need?  
For most applications, use one digger bucket for every nine standard buckets.  
     
Can I use buckets on an overlap splice?  
An overlap splice doubles the thickness of the belt, so a bucket's projection will increase on the overlap.  Usually this will not cause a problem, but if it does, you can use buckets with one inch less projection or cut the tip of each bucket by half an inch on the spliced area.  
     
When using an overlap splice, how much extra belt should I use for the splice?  
The length of the splice should be three times the width of the belt.  
     
How often should I replace head pulley lagging?  
Lagging should be replaced every time the elevator belt is replaced.

Bucket Elevator Design Service

Bucket Elevator Design Service

At 4B, we have designed hundreds of bucket elevators for all industries, including Animal Feed, Grain Handling, Flour Milling, Malting & Brewing through to Cement, Coal and other heavy industries.

Take advantage of 4B's free, guaranteed worldwide technical support service from a team of engineers specialising in the design and calculation of bucket elevators.. Using your key technical data, our engineers can give you a detailed technical recommendation for the ideal bucket elevator with the ideal capacity and discharge characteristics. We can either design your new bucket elevator or we can help you to increase the capacity of your existing bucket elevator.

To get a free bucket elevator calculation

Please fill this form in as accurately as possible to allow us to deal with your enquiry more effectively. 

At 4B, we have designed hundreds of bucket elevators for all industries, including Animal Feed, Grain Handling, Flour Milling, Malting & Brewing through to Cement, Coal and other heavy industries.

Take advantage of 4B's free, guaranteed worldwide technical support service from a team of engineers specialising in the design and calculation of bucket elevators.. Using your key technical data, our engineers can give you a detailed technical recommendation for the ideal bucket elevator with the ideal capacity and discharge characteristics. We can either design your new bucket elevator or we can help you to increase the capacity of your existing bucket elevator.

To get a free bucket elevator calculation

Please fill this form in as accurately as possible to allow us to deal with your enquiry more effectively. 

Contact Details

Elevator Details

If you would like to send us a technical drawing or document with your enquiry, please send to 4b-uk@go4b.com.